Touch Sensor Blue Ring ON/OFF Stepless Dimming DC12V 2A
- Switch Rating: DC 12V /2A , Max load:24W ,the touch dimmer switch has blue ring working indicator light .
- Installation :Mini Dimmer’s Mounting Hole Diameter :φ17mm ; DO NOT Install in metal materials ,Please Recessed in wood or wall .
- Easy Wiring :2510 terminal design is easy to connector witch DC 12V power supply plug and 12V LED Light.
- Function : Touch sensor Switch On/Off and Stepless Dimming; Touch button-Switch On;Touch again -Switch OFF ;Long touching the button-Stepless Dimming light.
- Widely used in indoor LED light such as desk light ,bed cabinet, kitchen, stairs, bookshelf ,showcase, TV back ,kinds of electric applications or DIY projects .
₹507.63 – ₹7,626.27
📜 Gst Invoice
🚀 Same Day Dispatch
⏰30-45 Minute Test of Full Order
✈ Only Blue Dart by Air Deliveries
- Type : touch dimmer
- Valtage: DC 12V
- Output current : 2A
- Max Load: 24W
- Interface: 2510 terminal
- Working Temperature:-20℃-50℃
- Mounting Hole Diameter:17mm
- Head Diameter:19mm
- Switch Height:11mm
- Switch indicator Light : Blue Ring
- This dimmer is only used for indoor and can't be installed in metal material
- If the LED light is always on after the wire is connected, the switch cannot be controlled.The reasons are as follows:
a.The positive and negative poles are reversed;
b.The input and output are reversed;
c.The working voltage does not match
- First determine whether the working voltage of the driver power supply is DC12V
- Check whether the positive and negative poles are connected reversely. If the positive and negative poles are reversed, the blue indicator light on the switch will not light up.
- Check whether the input and output are connected reversely.
1 piece of switch