12 Volt 30 Amps 360 Watt DC Switching Power Supply

VEEKAYLIGHT 12V 30A 360W DC Switching Switch Power Supply for LED Strip, CCTV, 12Volt 30 A - Silver

Description:-

• High quality Switch Power Supply, Widely used in Industrial automation, LED display, etc. With anti-jamming to ensures the long life LED lamps and reduce the LED luminous decay
• Universal AC input / Full range. The input voltage: AC 100V/240V, the output current: 30Amps
• Smart device surge protection for Shortage, Overload, Over Voltage
• Dual input voltage: AC 110V/220V. There is a switch, choose the proper voltage before use
• 100% full load burn-in test.Cooling by free air convection.
• The power supply fan does make a noise and the speed of the fan is load based. So the higher the load, the faster the fan runs, the louder the noise.

HOW TO USED POWER SUPPLY

• Input wire has to be connected L & N point, if there is an earthing wire then you can also use that.
• Check whether the led light on the right side is on.
• Put v- negative wire at the output point (wire color can be black), then you put positive wire on v+, (the color of the wire can be red)
• With the help of adjustable switch in this power supply, you can up and down the voltage up to 10% (keep in mind that it can become free by using more)

Connection:-

• L: FireWire
• N: zero line
• G: ground wire
• - V: load negative
• + V: load positive

Kindly Notes:-

1. High Voltage inside ,do not remove the cover. Qualified service personnel only
2. In-door use only, for this switch power supply is not waterproof
3. 110V/220V must be selected by switch before using to avoid damaging. Please change the switch to 220V for india.
4. The power supply fan does make a noise and the speed of the fan is load based. So the higher the load, the faster the fan runs, the louder the noise
5. External power supply round hole mesh heat vents, in the range of 50cm within the outlet Do not place other flammable items.
6. 5 cm in the product range not place other items, to ensure that the powersupply has good thermal environment, to ensure safety.
7. Please accurately calculate the load power, do not overload. When the power is working, do not touch the case.
8. Do not short-circuit output if no output, please use off one minute re-energized.
9. Before electricity use, carefully verify the power link is correct, rigorous power lines reversed.
10. Professional installation of qualified electrician is highly recommended.